Pumps

Description

An Air Operated Double Diaphragm (AODD) pump is a type of positive displacement pump that uses compressed air as a power source. The compressed air is shifted from one chamber to the other by a linked shaft that allows the chambers to move simultaneously. This back-and-forth motion forces liquid out of one chamber and into the discharge piping while the other chamber is being filled with liquid at the same time.

Applications

Transferring, Dosing, Water, Inks & Dyes, Transferring Fuels, Solvents, Abrasive Slurries, Sludge, Batching Chemicals, & More.

Description

ANSI B73.1 Chemical Process pumps. Drop in replacement parts for common Ansi pump brands. Various alloys and Seal arrangements. Low flow , High temp, Non clog vortex, and dynamic seal types. (Vertical sump pumps, Horizontal split case, and API options available)

Applications

Water Treatment, Chemical transfer, Process Pumps, Acids, Boiler Feedwater, & More

Description

API 610 is the API standard relating specifically to centrifugal pumps and centrifugal pumping systems. It provides design criteria for the design of the actual centrifugal pump, as well as how the centrifugal pump is to be tested, and what type of base it is to be mounted on.

Applications

Acid Leaching, Molten Liquid Sulfur Transfer, NOx Water Transfer, Black, Green and White Liquor, Ethane, Polyethane, Hot Oil, Phosphoric Acids, Sulfuric Acids, & More.

Description

High Chrome Cr27 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. Alloy Cr27 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required. These pumps are constructed out of High Chrome Iron for especially abrasive, erosive applications.

Applications

Hgih-Temperature, Abrasives-Laden Refining Applications, Heavy Oil Thermal Conversion, Gasification Processes, Hot Slurry, Quench Oil, & More.

Description

Internal Gear pumps for various viscous applications. Options for Magnetic Driven or Heat Jacketted. Various crossovers and drop ins for major brand names. Ask us more about our options for gear pumps

Applications

Oils, Fats, Food and Beverages, Fuels, Injection Systems, Lubrication Lines, & More

Description

In a magnetic drive centrifugal pump, the impeller and the pumped fluid are contained within a hermetically sealed housing. The drive shaft from the motor rotates an assembly of magnets on the outside of the housing. We have unique offerings that expand on this principle that can offer 30% solids handling and higher temperatures than traditional styles.

Applications

Acids, Sulphur, Cooling & Heating Circuits, Solvents, Chlorine Alkali, Molten Products, & More

Description

Seal-less designs, magnetic-driven pumps are ideal to meet the stringent requirements of chemical processing and a multitude of other industries. These highly advanced and extremely energy efficient pumps are built to handle a huge variety of corrosive fluids reliably and absolutely safely, especially even in high temperature applications. Inner-lined with PFA/PTFE to protect against aggressive, corrosive fluids.

Applications

Chemical Processing, Fine Chemicals, Pharmaceuticals, Tank Unloading, Bromine, Chlorine, Nitric Acid, Sulphuric Acid, & More.

Description

Seal-less design, magnetic-driven pumps are ideal to meet the stringent requirements of chemical processing and a multitude of other industries. Pump casing is constructed of thick vacuum, corrosion and permeation resistant solid plastic. Use of carbon filled PTFE prevents electrostatic charging on the casing. Alternatively, the pumps are also available in virgin PTFE or PVDF.

Applications

Chemical Processing, Pharmaceuticals, Pulp & Paper, Food & Beverages, Dichloromethane, Hydrochloric Acid, Nitric Acids, Most Acids, & More.

Description

Multistage booster pumps are industrial or commercial centrifugal pumps that are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required.

Applications

Hot and Chilled Water, Boiler Feed, Condensate Return, Irrigation, High-Pressure Washdown, Booster Service, Fire Protection/Sprinkler Systems, & More.

Description

A peristaltic pump is a type of positive displacement pump used for pumping a variety of fluids/solids The fluid is contained within a flexible tube fitted inside a circular pump casing. A rotor with a number of rollers/shoes/wipers/lobes attached to the external circumference of the rotor compresses the flexible tube. As the rotor turns, the part of the tube under compression is pinched closed thus forcing the fluid to be pumped to move through the tube. Additionally, as the tube opens to its natural state after the passing of the cam, fluid flow is induced to the pump.

Applications

Clean/Sterile Fluids, Aggressive Fluids, High-Solid Slurries, Agricultural Chemicals, Protein Transfer, Viscous Fluids, & More.

Description

Regenerative turbine pumps can safely pump liquids close to the boiling point without the detriment of cavitation or loss of flow. This pump is uniquely suited for low NPSH applications; as low 1ft NPSH pumps for high pressure pumping, which require only one foot of Net Positive Suction Head while operating at lower motor speeds.

Applications

Chemical Low NPSH, Water, Light Hydrocarbons, Liquefied Gases, Condensate Return, Boiler Feed, Multistage Industrial, & More.

Description

Rotary lobe pumps are used extensively in a variety of industries in place of progressive cavity pumps and centrifugal pumps. Rotary Lobe pumps have an advantage over progressive cavity pumps because of their small size, low cost maintenance-in-place capability and ability to run dry.

Applications

Viscous Fluids, Oily Water Sumps, Fine Abrasives, Screen Backwash, Corrosive Materials, Heavy Solids, & More.

Description

A rubber-lined slurry pump is designed to handle concentrations of fine and abrasive slurries. Typically includes an alloy pump casing with an especially tough elastomer lining to prolong the life of the pump by protecting against suspended solids.

Applications

Mining, Coal, Power and Energy Generation, Wastewater, Fly Ash, Refining Processes and Wastes, & More.

Description

The Air Diaphragm Pump is a positive displacement pump powered by compressed air. AOD pumps offer a sanitary, energy-efficient way to transfer product. They are ideal for viscous products, products that require no or low shear pumping, or products that contain solids or are nearly solid

Applications

Corrosive Chemical, Volatile Solvents, Viscous, Shear-Sensitive Foodstuffs, Pharma Product, Sticky Fluids, Dirty Water, Smaller Solids, Creams, Abrasive Slurry, Oils, Gels, & More.

Description

Range of Pumps either Electric driven, Engine driven, or Hydraulicaly driven. Capable of High heads, Corrosive resistance, and solids/abrasion resistance. 3″ solids handling and Self priming capabilities. Tailored to special sump applications and dewatering applications.

Applications

Sumps, Waste Water, Lagoons, Ponds, Mobile Units, Trash, & More

Description

Our submersible pumps are designed to be installed in the toughest of applications, from coal tunnel sumps to slag pits. These pumps are designed to transfer out abrasive and solid particulates mixed with liquids while continuing to keep everything in suspension during the process. With many different options for configuration, we can provide the right pump for your application just about every time.

Applications

Mining, Coal, Wastewater, Mineral Processing, Energy Generation, Steel Production, Drilling Mud, Slurry Transport, Hydraulic Fracking, Sand and Gravel, Lime Slurry, Fly Ash, and more.

Description

A plunger pump is a type of positive displacement pump where the high-pressure seal is stationary and a smooth cylindrical plunger slides through the seal. This makes them different from piston pumps and allows them to be used at higher pressures. This type of pump is often used to transfer municipal and industrial sewage.

Applications

Descaling, High-Pressure Washing, Metering, Hydro-static Testing, Injection, CO2 and Foam Firefighting, Chemical/Oil Processing, & More.

Description

A cantilever pump is considered a centrifugal pump configured with the impeller submerged in the fluid to be pumped. But unlike a traditional vertical column sump pump, there are no bearings below the motor supporting the impeller and shaft.

Applications

Hot Water and Acids, Corrosive and Abrasive Liquids, Acids, Explosive Liquids, Waste, and More.

Description

Vertical sump pumps are intended for use in the industrial pumping applications to pump clean or lightly contaminated liquids, fibrous slurries and liquids containing large solids from the deep sumps. The pumping head is suspended into the pumped liquids and the drive motor is dry installed on the top.

Applications

Sump Drainage, Flood Control, Air Wash Systems, Power Plants, Industrial Processes, Condensation Control, Hydrocarbon Processing, Pharmaceuticals, Wet Pit, Water Treatment, Dewatering Service, & More.